Ambersil Non-Silicone Release FG is a NSF M1 and H1 registered, non-silicone mould release agent. Based on edible’ vegetable oils and has been formulated for the release of many commonly used types of polymers in the food processing industry.
Provides a wet’ non-silicone release film for the release of polymers utilised in injection moulding, vacuum forming and many other moulding and forming processes. Ideal for use in the production of food quality packaging. Will not build up in the mould and helps to improve surface finish, reduce rejects and increase production.
Features and Benefits
- NZ AsureQuality Approved
- MPI C81 Approved – mould release agent
- MPI C15 Approved – lubricant Incidental contact
- NSF H1andM1 registered – mould release agent
- Use on food packaging which is intended for direct food contact such as plastic containers and bottles
- Will not interfere with post moulding operations such as bonding and labelling
- Operational temperature to +170 degreesC
Physical Properties
| Appearance | Clear, colourless liquid |
| Odour | Hydrocarbon |
| Pressure @ 25 degrees C | 3 Bar |
| Specific Gravity @ 25 degrees C | 0.75 |
| Discharge Rate | 0.9g/sec |
| Temperature range | Operational up to 200 degrees C |
| Solubility | Soluble in solvents, insoluble in water |
| Flammability | Classified as extremely flammable under current EC Regulations |
| Flashpoint | Not applicable in sealed aerosol |
Specifications:
| CRC/Barcode | Pack Sizes Available |
|---|---|
| 32446 144788 |
Can 400 ml, pack size 6 20.00cm H x 6.50cm W x 6.50cm D : 0.34kg |











Reviews
There are no reviews yet.